Ghost Overview, Page by Page
Every screen in the product, what it shows you, and what each control actually does. The reference to keep open while you set things up.
On this page
The map
Ghost has seven main screens. You will spend nearly all your time on two of them, the dashboard and the logs.
| Page | What it is for |
|---|---|
| Dashboard | What is open right now, and the controls to stop everything. |
| Tickers | Your automated configurations, one per strategy and symbol. |
| History | Closed trades, with export. |
| Logs | Every signal received and what Ghost did with it. |
| QC Auto | AI generated signals that trade without an external source. |
| Settings | Broker connections, risk limits, demo mode. |
| Guide and Support | Setup walkthrough, AI support, and tickets. |
Dashboard
The operational view. If you check one page during a session, this is it.
Top controls
| Control | What it does |
|---|---|
| Start and Stop Ghost | The master switch. While it is off nothing executes, including exits. This is the single source of truth for whether your automation is live. |
| Kill switch | Closes every open position at your broker and stops Ghost. It asks for confirmation, then it is immediate. |
| Privacy mode | Masks account numbers and secrets across the product, for streaming or screen sharing. |
| Demo or Live label | Tells you at a glance whether orders are actually reaching your broker. |
| Sync | Checks each broker and closes any Ghost record the broker has already closed. Ghost also does this automatically every thirty seconds. |
Panels
Active positions
Every open position with direction, entry, live price, profit and loss, stop and target, and which accounts are in the trade. Futures profit and loss is calculated live from the price feed. Forex profit and loss comes from your broker directly, because a price feed cannot account for spread and swaps accurately enough.
Each row has a Close button, and this is the one place people get caught out: Close removes the record from Ghost, it does not close the trade at your broker. The confirmation says so. It exists to clear a record that is out of sync.
Resting limit orders
Orders waiting at your price that have not filled yet, with the limit price, stop, target, size, and when it was placed. Each has a Cancel button so you can pull one without sending a webhook.
Broker connections
Every connected broker with its accounts, expandable, with inline nickname editing and a refresh for when a newly funded account has not appeared yet. A disconnected broker raises a banner here, because a disconnect means your alerts cannot execute.
Slippage tracking
Thirty days of the difference between your signal price and the actual fill, averaged and worst case, broken out per ticker for entries and exits. This is how you find out that a strategy which backtests well is losing its edge in the gap between the alert and the fill.
Configured tickers
A quick grid of your tickers with on or off state and size, so you can confirm what is armed without opening the tickers page. Tickers where recent entries were refused for safety reasons are flagged here in red.
If the dashboard says Ghost is stopped
The banner appears when the master switch is off. It says new entries are paused and that stopping does not close positions or cancel working broker orders. The daily loss limit does not stop Ghost: when it is reached, Ghost stays running, new entries are blocked until the 5:00 PM ET session reset, and each blocked entry appears in your Signal Log with the reason.
Tickers
A ticker is one automated configuration: a symbol, its risk settings, its account routing, and its own webhook URL. Two strategies on the same symbol means two tickers with different strategy names, each with its own webhook.
Tickers are separated into futures, forex, and crypto tabs automatically, and each tab has a master switch so you can disable a whole market at once. There are also status filters and named groups for organizing a long list.
Each card shows size, stop and target distances, connected accounts, and badges for the behavior modifiers that are on, such as contrarian or a direction filter. From the card you can edit settings, duplicate the ticker with all its settings, rename it, or delete it.
Ticker settings
This modal is where the actual behavior of your automation is decided.
Size and brackets
| Setting | What it does |
|---|---|
| Contracts | Position size. Decimals allowed for forex lots and crypto units. |
| Webhook Controls Contracts | Lets qty in the alert set the size instead. |
| Use Stop Loss and Take Profit | The master switch for brackets. Off means no stop or target is sent to the broker at all. |
| SL and TP points | Distance from entry for the stop and the target. |
| Pips mode | Forex only. Express the stop and target in pips. |
| Use Webhook SL/TP | Let the alert send exact stop and target prices instead of using distances. |
| No Take Profit | Send the stop with no target, for runners. |
Behavior
| Setting | What it does |
|---|---|
| Contrarian mode | Flips every signal, with stop and target values swapped to match. |
| Direction filter | Both sides, long only, or short only. Applied after contrarian. |
| Signal delay | A short pause before execution, if you do not want instant fills. |
| Max daily trades | Caps entries per day for this ticker. |
| Trading hours | Up to three named windows in Eastern time, including overnight windows. |
| Session close | A daily time to flatten this ticker automatically. Also clears resting limit orders. |
Routing and integration
| Setting | What it does |
|---|---|
| Account selection | Which broker accounts this ticker trades. Turn on Copy Trader to select many accounts, including accounts at different brokers. |
| Webhook URL and secret | The address your alerts post to, with a copy button and a test button. |
| Alert message builder | Generates the JSON payload for your compatible alert source, from basic to advanced. |
| Custom webhook relay | Forward every signal to your own URL with a JSON template you control. |
| Notes | Private notes on the ticker, for your own reference. |
Saving this modal saves the whole configuration
The settings modal writes back the full ticker configuration when you save. If you changed something for this ticker somewhere else, in another tab or from another device, reopen the modal before saving so you are editing current values rather than what was on screen when you opened it.
History
Closed trades with the symbol, direction, entry, and timestamps, filterable by market category and by winners or losers, with a CSV export for your own analysis or for handing to a prop firm. Trades that were closed by your broker hitting a stop or target are recorded with the real broker fill price rather than an estimate.
Logs
The page that answers why. Every signal that arrived is recorded here, whether it executed or not, and the ones that did not have the reason attached.
Filters
All, executed, errors, and rejected, each with a count, so you can jump straight to the failures.
Expandable rows
Open a row to see the exact payload that arrived and the request that was sent to the broker. This is how you prove whether a problem is your alert or the execution.
Diagnose with AI
Failed rows have a button that reads the payload and the error and explains what went wrong in plain language, with the fix.
Quick fix guide
A built-in reference of the common errors and their causes, on the page where you need it.
QC Auto
QC Auto analyzes charts with AI on a schedule and executes what it decides on, using your configured stops, targets, sizing, and account routing. There is no external signal source and no TradingView alert involved.
Per ticker you set the broker and account, size, stop and target as points or as a percentage, contrarian and direction filters, a timeframe preset from scalping through swing, a minimum confidence threshold, a trading window, and a session close time. There is an Analyze Now button for running it on demand.
QC Auto is capped at one ticker per market category per user. It respects the same risk controls as the rest of Ghost, never stacks positions, and refuses to enter when no broker stop can be placed.
Settings
General
Daily loss limit
Opt in, set a dollar amount. Broker-confirmed realized losses are measured from the 5:00 PM Eastern session reset. Hitting the limit blocks new entries until the next 5:00 PM Eastern reset. Ghost stays on and exits are never blocked.
Demo mode
Process and log signals with nothing reaching the broker. The way to validate a new strategy safely.
Account security
Two factor authentication for your QuantCrawler account.
Brokers
Connect, reconnect, and manage all eleven brokers here, with a risk acknowledgment before any connection. Each connected account can be given a nickname.
The setting worth reading twice is on Tradovate: the choice between a prop firm account and a personal live account. They are different Tradovate environments, and choosing the wrong one is the usual reason an account list comes back empty. You can connect more than one Tradovate login, which is how traders with accounts at several firms manage them in one place. Rithmic asks you to pick your system, which is your prop firm, before your username and password.
Advanced
A danger zone containing the setup reset, which deletes your tickers and positions and disconnects your brokers. It exists for starting clean, and it does what it says.
Guide and support
Guide
A step by step setup walkthrough inside the product, including a webhook actions reference.
AI support
A support chat that can read your recent signal history, so it can explain why a specific trade did or did not fire rather than guessing.
Tech support ticket
Reaches the team with your logs attached, for anything the AI support cannot resolve.
Trade Copier
The Trade Copier is a separate product with its own set of pages, for mirroring one futures account into many.
| Page | What it is for |
|---|---|
| Cockpit | The fleet view. Groups, leader and followers, live sync status, per follower size overrides, pause and flatten controls, and recent copy activity with per account results. |
| Connections | Connect the broker accounts that participate in copying: Tradovate, ProjectX, and Rithmic. |
| Risk Management | Daily loss limit and daily profit target per account with live progress, plus a manual lockout and a log of risk events. |
| Journal | Performance read straight from the broker and already net of commissions, with charts, a monthly calendar, per ticker breakdown, and CSV export. |
| Alerts | A rolling feed of follower failures, connection problems, and risk events. |
| Setup | The guided first run for creating your first copy group. |
Frequently Asked Questions
Where do I start as a new user?
Settings first to connect a broker, then Tickers to create your first automated configuration, then the ticker settings modal to set size, stop, target, and which accounts it trades. The dashboard is where you live once it is running.
What is the difference between the Dashboard and the Logs page?
The dashboard shows state: what is open right now and what it is worth. Logs show history: every signal that arrived, what Ghost decided, and why. When something did not happen the way you expected, the answer is almost always in Logs.
Does closing a position on the dashboard close it at my broker?
No. The Close button removes the record from the Ghost dashboard only, and the confirmation says so. Use it to clear a record that is out of sync. To exit a real trade, send an exit signal or close it at your broker, or use the kill switch to flatten everything.
Why is Ghost showing as stopped?
Ghost shows as stopped when its master switch is off, for example after Stop Ghost or the kill switch. The daily loss limit never stops Ghost: when it is reached, Ghost stays running, new entries are blocked until the 5:00 PM ET session reset, and each blocked entry appears in your Signal Log.
What is the difference between Ghost and QC Auto?
Ghost executes properly formatted JSON webhook signals from any compatible external source. TradingView is one option. QC Auto generates its own signals by analyzing charts with AI, then executes them using your configured risk settings. They live in the same product and share the same safety controls.
Continue Learning
Risk Disclosure: Trading involves substantial risk of loss and is not suitable for all investors. This content is for educational purposes only and does not constitute financial advice.
Last updated: November 2026